Place of Origin: | China |
---|---|
Brand Name: | RECODA |
Certification: | CE / FC / ROHS |
Model Number: | CM04-AHD |
Minimum Order Quantity: | 1 |
Price: | negotiation |
Packaging Details: | one pcs per box, fifty pcs per carton |
Delivery Time: | 3-5days after receiving your payment |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 5000pcs per month |
Image Sensor: | 1/3” SONY IMX238 | Resolution: | 1.3 / 2.0 Mpixels |
---|---|---|---|
Lens: | Standard 3.6mm | IR LED Range: | 10M |
IR LED: | 12pcs | Input Voltage: | DC12V±10% 110mA |
Dimension: | 54 X48mm | Weight: | 109g |
High Light: | vehicle surveillance cameras,car mounted camera |
Features:
● Metal-cased mobile box with fixed lens.
● Available in black finish.
● Low power consumption.
● 180 Degree Rotate.
● Easy installation on ceiling or wall, surface or flush mount.
● IP66 waterproof.
Specifications:
Model | CM04-AHD ( 1.3MP ) | CM04-AHD ( 2MP ) | |
Type | Mini dome car camera | ||
Pick up Device | 1/3” SONY IMX238 | 1/2.8 Sony IMX222 | |
TV System | PAL/NTSC(OPTIONAL) | ||
Effective Pixel | 1280Hx960V | 1920H x 1080 V | |
Sensitivity | 0 lux (IR LEDs On) | ||
Scanning System | Progressive scan RGB CMOS | ||
Synchronization | Internal | ||
Infrared Spectrum | 850nm or 940nm | ||
S/N Ratio | More than 50dB(AGC Off) | ||
Noise Reduction | 3D | ||
Auto Gain Control (AGC) | Auto | ||
Electronic Shutter | Auto | ||
Back Light Compensation | Auto | ||
Infrared LED | 12 LEDs | ||
Infrared LED Range | 5m | ||
Video Output | AHD 1 Vp-p, P 75Ω | ||
Gamma Ratio | 0.45 | ||
Lens | f3.6mm Megapixel | ||
Pan Adjusting | N/A | +/-180 Degree | |
Tilt Adjusting | 0-62 Degree | ||
Power Supply | 12V DC ±10% | 12V DC (9V~18V) | |
Power Consumption | 110mA | 110 mA | |
Dimensions (ø X H) | 54 x48mm | ||
Net Weight | 109g | ||
Weatherproof/Water Proof | IP66 | ||
Operating Temperature | -20°C to +65°C | -25°C to +60°C |
Product's Image:
Operation procedures:
1. Loosen the lock screws (3), remove the mounting base (1) by rotating clockwise the locking cover (2).
2. Attach the mounting base (1) to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joint and secure the base by the supplied mounting screws (5).
3. Connect the cable to 12VDC power source and Video output, when picture shown up on the monitor.
4. Make the ball camera (4) to the suitable position.
5. Fix the ball camera by rotating anti-clockwise locking cover (2) then lock the screw (3)
Connection:
Packing list:
Camera 1
Instruction Manual 1
Self Drilling Screw 4
Mounting Plug 4
Hexagon Key 1
Optional Lens selectable from f3.6mm to f12mm
Dimensions: